Copper extrusion press
Purpose:
The series equipment is suitable for extruding tubes, rod, wires, etc products of coppers and their alloys.
Features:
1. The machine has a four-column horizontal structure consisting of top-mounted oil tank, well-laid hydraulic piping and integrating electrical system.
2. Mobile beam can be located at four positions and centre-adjusted. Reasonable design of tools and moulds can greatly reduce production cost.
3.Different extruding process can be set to produce tubes having different bores with the way of following and fixed piece.
4.Large flow rate plug-in valve system used in hydraulic unit results in a good seal and low temperature rise.
5 PLC devices from Japan Mitsubishi arc of reliability and sensitivity.
Technical Specifications
|
Model
(t) |
Rated pressure
( Mpa) |
Rated extruding force (Kn) |
Center height of main unit
(mm) |
Dimension of container
(mm) |
Main motor power
(Kw) |
Overall dimension
(m) |
|
300t |
21 |
3000 |
700 |
¦µ55-¦µ75¡Á350 |
110 |
5.5¡Á2.1¡Á2.3 |
|
500t |
21 |
5000 |
895 |
¦µ75-¦µ95¡Á400 |
150 |
7¡Á2.3¡Á2.7 |
|
630t |
21 |
6300 |
945 |
¦µ85-¦µ105¡Á400 |
225 |
7.5¡Á2.3¡Á2.8 |
|
800t |
21 |
8000 |
1045 |
¦µ105-¦µ135¡Á550 |
396 |
10¡Á2.3¡Á3.1
(11¡Á2.3¡Á3.1) |
|
1000t |
21 |
10000 |
1095 |
¦µ125-¦µ145¡Á600 |
396 |
10.5¡Á2.4¡Á3.3
(11.5¡Á2.4¡Á3.3) |
|
1250t |
21 |
12500 |
1185 |
¦µ135-¦µ165¡Á650 |
528 |
12¡Á2.5¡Á3.4
(13¡Á2.5¡Á3.4) |
|
1630t |
21 |
16300 |
1285 |
¦µ155-¦µ205¡Á750 |
1000 |
13.5¡Á4.3¡Á4.1
(14.5¡Á4.3¡Á4.1) |
|
1800t |
21 |
18000 |
1285 |
¦µ175-¦µ225¡Á800 |
1000 |
14¡Á4.3¡Á4.1
(15¡Á4.3¡Á4.1) |
|
2000t |
21 |
20000 |
1650 |
¦µ195-¦µ245¡Á850 |
1075 |
15.5¡Á4.5¡Á4.3
(17¡Á4.5¡Á4.3) |
|
2500t |
21 |
25000 |
1700 |
¦µ225-¦µ265¡Á900 |
1250 |
18¡Á4.8¡Á4.5
(20¡Á4.8¡Á4.5) |
|
3000t |
21 |
30000 |
1860 |
¦µ255-¦µ305¡Á1000 |
1500 |
20¡Á4.8¡Á5
(22¡Á4.8¡Á5) | |
